Demister Pads

Pars Regulator Standard Demister Pads are entrainment eliminators. They are specially designed and fabricated from knitted wire of metallic or synthetic materials, to suit specific process configuration in existing or new equipment. Solid-Liquid Separation, Liquid-Liquid separation, Gas-Liquid Separation

Salient Features of Our Demister Pad

Easy to install
No moving parts
Over 99% efficiency in most separations
Low pressure drops
Light weight
Fits in all process equipment
Requires no maintenance
Easy to clean with air, water, and steam

Product Configurations

Our Demister Pad is specially designed and fabricated from knitted wire of metallic or synthetic materials, to suit specific process configuration in existing or new equipment. It achieves 99.9% + separation efficiency with minimal pressure drops.

Demister Pads Application

In air pollution control, to eliminate toxic mist from off-gases, E.g., sulphuric acid plants.
To reduce solvent losses in absorbers, scrubbers, and distillation equipment. E.g., amine treating systems.
To minimize product losses in kettles, reboilers, vacuum pans, crystallizers, and evaporators. E.g., sugar crystallization.
To eliminate entrainment in knock out drums and receivers.
To eliminate entrainment that might damage compressors.
To supplement equipment like carbon absorbers and electrostatic precipitators.
In refinery towers to prevent carbon and metal entrainment to downstream catalytic cracker and reformer units.
In liquid-liquid systems such as coalescers.
Sealing – gaskets made of knitted mesh having different degrees of re-silence. E.g., in cable industry, radiation, shielding, automobile and computer industry.

WHY Pars Regulator STANDARD

The right weaving loom for each specification coupled with the experience of both, Pars Regulator & Boecker and HAST guarantee the most suitable Woven Wire Cloth for every demand. Added to that is ISO 9001-2008 certification assuring the highest quality products. From wires as thick as 0.7 mm diameter, down to those finer than a human hair of only 0.025 mm diameter (25 microns) we weave all materials, such as stainless steel, copper, brass, phosphor, bronze, nickel, monel, silver and plastics.

HAST is committed to building a quality organization with our customers as our primary focus
We shall achieve this through a process of continual improvement in all areas of operations, giving emphasis on people’s active involvement, adherence to documented procedures and continuous up-gradation of technology
HAST is committed to complying with requirements and constantly improving the effectiveness of the quality management system, providing a framework for establishing and reviewing quality objectives.