SS Sintered / Multilayer Filter Cartridges

Stainless Steel sintered powder filter cartridges are recommended for the filtration of air or liquid at higher operating temperatures & corrosive environments. Sintered S.S. cartridges are produced by cold isostatic pressing, which gives high porosity to the material and stability. They can easily be cleaned or back washed thus having longer shelf life. Sintered filters can withstand high differential pressure across the filters.

FEATURES & BENEFITS:

  High mechanical strength & good integrity

  Good corrosion and thermal resistance

  No possibility of media migration

  Good permeability

  Service life can be prolonged by cleaning and regenerating process

PRODUCT SPECIFICATIONS

Micron Rating	0.5, 1, 3, 5, 10, 25 µ
Length	100 mm to 1000 mm or as per request
Outer Dia	63 mm, other dia available on request
Inner Dia	57 mm
Wall thickness	3 mm
Max operating temp	No constraint
Sterilization Autoclave Hot water	121°C, 30 min, 10 times 80°C, 30 min, 30 times
Effective surface area for sintered filter element	Approx 1000 cm2 per standard 500 mm long cartridge

CONSTRUCTION

  Filter media: SS 316L

  End Caps: SS 316/ SS 316L

  ‘O’ Ring/ Gaskets: Silicone/ EPDM/ Viton

CONFIGURATION

  Double open end- DOE

  Code 7S (226- double ‘O’ Ring / fin)

  1” BSP threaded, another end closed

APPLICATIONS

  Gas & liquid filtration

  Solid catalyst recovery

  Filtration of slurry oil

  Filtration of petrochemical products

  High temperature gas filtration

  Vent applications

  Chemical reagents

  Fluidization

  Sparging